Load data for .30 PICRA + .308 | 200gr | Speer Spitzer Soft Point

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 200gr \| Speer Spitzer Soft Point
Manufacturer SKU:	2211
Bullet Weight:	200gr \| 13.0g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	<<locked>>
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B6176_C311
Last updated:	2026-01-31

Load data for 46 loads in caliber .30 PICRA with .308 | 200gr | Speer Spitzer Soft Point bullet and 23 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	72%	36318	89%	**53	100%
ADI APS 350	<<locked>>	62%	36230	89%	**3	100%
ADI APS 450	<<locked>>	63%	36056	89%	**3	100%
Accurate 4100	<<locked>>	72%	36405	90%	**52	95%
[Accurate No. 11 FS]*	<<locked>>	81%	36114	89%	**55	88%
Alliant 2400	<<locked>>	69%	36550	90%	**52	97%
Alliant BLUE DOT	<<locked>>	71%	35491	87%	**02	100%
Alliant Herco	<<locked>>	71%	36405	90%	**8	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	74%	36419	90%	**9	100%
Hodgdon H110	<<locked>>	76%	35882	88%	**71	92%
Hodgdon LilGun	<<locked>>	76%	35331	87%	**91	97%
Maxam CSB 1	<<locked>>	63%	36085	89%	**8	100%
Ramshot Enforcer	<<locked>>	68%	35302	87%	**38	98%
ReloadSwiss RS 30	<<locked>>	92%	35781	88%	**98	95%
SNPE Vectan A0	<<locked>>	63%	36390	90%	**1	100%
SNPE Vectan BA6 1/2 👍	<<locked>>	94%	36405	90%	**45	99%
SNPE Vectan BA7 1/2	<<locked>>	66%	36361	90%	**14	100%
Somchem S265	<<locked>>	84%	36376	90%	**29	91%
Vihtavuori 3N38	<<locked>>	67%	35462	87%	**79	100%
Vihtavuori N105	<<locked>>	70%	35331	87%	**89	100%
Vihtavuori N110	<<locked>>	85%	36071	89%	**61	98%
Vihtavuori N32C Tin Star	<<locked>>	77%	35650	88%	**0	100%
[Winchester 296]*	<<locked>>	76%	36332	89%	**91	89%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	62%	27775	68%	**8	100%
ADI APS 350	<<locked>>	60%	34563	85%	**7	100%
ADI APS 450	<<locked>>	61%	34505	85%	**6	100%
[Accurate 4100]*	<<locked>>	61%	25628	63%	**01	89%
[Accurate No. 11 FS]*	<<locked>>	67%	23496	58%	**8	80%
Alliant 2400	<<locked>>	60%	28166	69%	**37	94%
Alliant BLUE DOT	<<locked>>	61%	26803	66%	**1	98%
Alliant Herco	<<locked>>	62%	28950	71%	**6	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	62%	27673	68%	**3	100%
[Hodgdon H110]*	<<locked>>	61%	22031	54%	**5	83%
[Hodgdon LilGun]*	<<locked>>	61%	20595	51%	**1	89%
Maxam CSB 1	<<locked>>	62%	34722	85%	**5	100%
Ramshot Enforcer	<<locked>>	61%	28094	69%	**43	95%
[ReloadSwiss RS 30]*	<<locked>>	67%	17898	44%	**6	80%
SNPE Vectan A0	<<locked>>	62%	35056	86%	**8	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	64%	15998	39%	**0	88%
SNPE Vectan BA7 1/2	<<locked>>	61%	31357	77%	**5	100%
[Somchem S265]*	<<locked>>	64%	20552	51%	**2	80%
Vihtavuori 3N38	<<locked>>	61%	29399	72%	**10	100%
Vihtavuori N105	<<locked>>	61%	26643	66%	**8	100%
[Vihtavuori N110]*	<<locked>>	61%	17347	43%	**3	86%
Vihtavuori N32C Tin Star	<<locked>>	73%	32880	81%	**3	100%
[Winchester 296]*	<<locked>>	63%	23496	58%	**4	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data